What are Smart LEDs?

On this page we explain a little about the Smart LEDs that form the basis of our technology

Individually addressable

By now, everyone is familiar with LED lighting. Its biggest advantage, of course, is that it is far more energy-efficient than traditional incandescent lighting. LED lighting also delivers much more light output. Most people are also familiar with coloured LEDs that can be dimmed as well, allowing you to quickly and easily create atmosphere in a room. However, the Smart LEDs we use go one step further!

These Smart LEDs are individually addressable. This means that in an LED strip, which can contain hundreds of LEDs, we can switch each LED separately on and off, and also give each LED a different colour. This makes remarkable applications possible. For example: giving a lamp a colour gradient from top to bottom, switching on only the top half of a lamp, or making the lamp respond to picture and sound.

Which LED strips do we support?

We support various types of LED strips, but not all of them! We support the most common individually addressable LED strips, for example WS2811, WS2812B, WS2813, WS2815, SK6812, TM1903, SK9822, APA102 and HD107S based LED strips. These effectively have tiny computers on board that communicate with each other. Our preference is for SK6812, as these are also available in an RGBW  version.

This means that, in addition to the red, green and blue LEDs, there is also a separate white LED on board. These LED strips are often also available in different colour temperatures. In our experience, being able to produce warm white is a real asset. These RGBW LED strips come built in as standard in our consumer lamps, and for your own installations we can of course advise you on which strips to buy, or supply the LED strips to you. Always check with us in advance to avoid disappointment and damage!

What is colour temperature?

The SK6812 LED strips we use feature an additional white LED alongside the red, green and blue LEDs. This RGBW version, however, comes in different colour temperatures. What does that mean? The image says it all: it shows an example of cold white, neutral white and warm white.

We normally use the warm white variant. Warm white light is very relaxing and particularly pleasant in domestic settings. This warm light most closely resembles the light of a dimmed incandescent bulb.

In our software we can also simulate the colour temperature for you. We do this by combining the RGB and W LEDs: red, green and blue light together produce cold white, which we then mix with warm white to create neutral white. We can also simulate warm white using RGB-only LED strips, but this is an approximation and comes at the expense of brightness.

How does the communication work?

What makes the SK6812 LED strips we use special is that the LEDs communicate with each other. As a result, each LED strip needs only three wires: one wire for the power supply, one for ground and just one wire for the data, which controls every LED in every colour.

Each LED passes the data on to the next one, like a shift register. The data is refreshed no fewer than 800,000 times per second (800 kHz). You don’t need to worry about any of this, of course: our controller takes care of it all for you. But it does mean that changes to the LEDs happen faster than the human eye can perceive, and therefore in real time!

You can connect multiple LED strips to our Led Computers. We offer standard versions with 2 and 4 channels, but custom configurations with more channels are of course also possible.

Which lengths are available?

The lengths we supply in SK6812 depend on the number of LEDs per metre you require. Our range includes 30, 60 and 144 LEDs per metre. More LEDs per metre means fewer visible dots. With indirect lighting, 30 or 60 LEDs per metre is not a problem, but where the LEDs are directly visible it is. For our consumer lamps, for example, we preferably use 144 LEDs per metre.

One drawback of these Smart LEDs is that they run on 5 Volts. Lower voltage always means higher current (Ohm’s law). Over longer runs this can cause voltage drop, which in turn can result in colour shifts or failure. The 30 and 60 LEDs per metre strips are normally supplied on 5-metre reels and the 144 LEDs per metre strips in 2-metre lengths, but they can always be cut to length or joined to achieve the exact length required. Anything is possible!  Read below about the options for longer runs.

Power supply for longer runs?

But what if you need longer runs? We can of course solve this for you! It is possible to feed the LED strips from both ends, or even in the middle. This does require a solid power supply plan and a solid cabling plan. We call this Multipoint Power Insertion. We will of course be happy to help you with this.

Optionally, we can install Power Boosters so that 5 Volt strips can run on a 12 or 24 Volt power supply. To determine the thickness of the cables to be laid, calculations are needed. This is often underestimated! The required thickness depends on the length of the cables, because voltage drop also occurs across the cabling itself at high currents.
Normally we prefer to place the power supplies and controllers as close as possible to the LED strip, but if that is not possible, we are happy to look at alternative LED strips with you, such as WS2812B or WS2813 with a 
12 or 24 Volt power supply. We always have a suitable solution for every possible problem, but prevention is better than cure! Check with us in advance to avoid disappointment!

Your dream lighting!

A living room with multiple moods? A staircase where each step lights up as you tread on it? Lights that switch on by themselves when you walk into a room? Lights that switch on automatically at sunset? Lights that take on a particular colour depending on who enters the room? Lights that follow the picture of your film or game, or the sound of your party? A cabinet of books, CDs or Blu-rays that finds titles for you? Want to control your lighting by voice, or integrate everything with your existing home automation system? Yes, it’s all possible!

Want to make your dream lighting a reality? Please contact us. We will be happy to help you design and install your dream lighting!